Description
REDARC BCDC1220-IGN — 20A Ignition Control Under-Bonnet DC Charger
Keep your aux battery charging while you drive, even on vehicles with smart alternators. The REDARC BCDC1220-IGN is a compact 12V, 20A multi-stage DC-DC charger with an ignition trigger and a low-input voltage setting, so it keeps working when alternator voltage drops. It’s fully sealed and potted for under-bonnet life, handling heat, water, dust and vibration without fuss.
It supports a wide 9–32V input, so you can charge a 12V auxiliary battery from both 12V and 24V systems. Select the correct profile for your battery chemistry and the charger will bring it to an optimal state of charge while protecting your start battery with built-in isolation. Quiet, fan-free operation and optional stainless mounting brackets make for a neat, reliable install.
Key features
-
20A multi-stage charging for 12V auxiliary batteries
-
Ignition-controlled operation for variable-voltage alternators
-
Low-input voltage setting to keep charging at reduced alternator output
-
Wide input range: 9–32V (works in 12V and 24V vehicles)
-
Battery type selection: AGM, Gel, Calcium, VRLA, Standard Lead-Acid
-
Start battery isolator function to prevent discharge
-
Sealed, potted electronics for under-bonnet mounting; fanless and quiet
-
Vehicle-specific 304 stainless mounting brackets available
Good to know
For best results, have a qualified auto electrician fit the unit with quality fusing and the correct bracket placement for airflow and serviceability.
| Warranty | 2 Years |
|---|---|
| gtin_barcode | 9338628003112 |
| brand | REDARC |
| Battery Chemistry | Not suitable for Lithium (LiFePO4) |
| Power Type - AC DC | DC TO DC |
| Nominal Output Power | 149W (12V vehicle) / 294W (24V vehicle) |
| Input Fuse Rating | 17A to 23A (Not supplied) |
| Suitable For 12V Systems | Yes |
| Suitable For 24V Systems | Yes |
| MPPT Solar Regulator | No |
| Cabin/ Canopy Install | Yes |
| No Load Current | <100mA |
| Trailer Install | Yes |
| Engine Bay Install | Yes |
| Max. Charging Voltage | 15.3V |
| Output Fuse Rating | 32A (Not supplied) |
| Operating Temperature | -20°C to 80°C |
| Output Voltage | 12V DC |
| Max. Rated Output Current | 11A (12V vehicle) / 20A (24V vehicle) |
| Input Voltage | 9 - 32V |
| Standby Current | <5mA |
| Connector Type | Bare wire |
| Weight | 450 g |
| width | 120 mm |
| height | 37 mm |
| depth | length | 100 mm |
