Description
Power bigger touring setups with the REDARC BCDC Classic40. This in-vehicle 12V, 40A DC charger keeps your auxiliary battery charging while you drive and from solar when you’re parked. It’s under-bonnet rated, fully potted and sealed to handle heat, dust and water, so it’s built for Australian conditions.
An integrated MPPT solar regulator and Green Power Priority use available solar first, easing the load on your alternator. The Classic40 works with 12V and 24V vehicles, including smart/variable-voltage alternators, and supports modern chemistries such as LiFePO4, along with AGM, Gel, Calcium and standard lead-acid.
As a guide, choose the BCDC1240D for lead-acid banks over 200Ah or lithium banks over 100Ah. For smaller systems, the BCDC1225D is the better match. Built and tested in Australia, the Classic series is proven in extreme heat and on rough tracks, from the Simpson to Cape York.
Key features
-
40A in-vehicle charging from alternator and solar
-
Dual inputs with integrated MPPT regulator
-
Green Power Priority selects solar first
-
Works with 12V/24V systems and smart alternators
-
Compatible with AGM, Gel, Calcium, standard lead-acid and LiFePO4
-
Sealed, potted electronics for reliable under-bonnet installation
-
Independent, proven charging profiles for a proper state of charge
Sizing guide
-
Lead-acid banks: typically >200Ah
-
Lithium (LiFePO4): typically >100Ah
Always check your battery manufacturer’s maximum charge current and ensure the charger’s continuous rating suits your setup.
Specifications
| Warranty | 2 Years |
|---|---|
| gtin_barcode | 9338628004355 |
| brand | REDARC |
| Battery Chemistry | Standard Lead Acid, Calcium content, Gel, AGM or LiFePO4 type only |
| Continuous Rating | 40A |
| Power Type - AC DC | DC TO DC |
| Nominal Output Power | 600W |
| Input Fuse Rating | 60A (Not supplied) REDARC FK60 recommended |
| Solar Switch On Voltage | 9V |
| Suitable For 12V Systems | Yes |
| Suitable For 24V Systems | Yes |
| Solar Input Voltage | 9 - 32V |
| MPPT Solar Regulator | Yes |
| Cabin/ Canopy Install | Yes |
| No Load Current | <100mA |
| Trailer Install | Yes |
| Engine Bay Install | Yes |
| Max. Charging Voltage | 15.3V |
| Output Fuse Rating | 60A (Not supplied) REDARC FK60 recommended |
| Operating Temperature | -20°C to 80°C |
| Output Voltage | 12V DC |
| Max. Rated Output Current | 40A |
| Input Voltage | 9 - 32V |
| Standby Current | <8mA |
| Connector Type | Bare wire |
| Weight | 1 kg |
| width | 120 mm |
| height | 37 mm |
| depth | length | 165 mm |
