Description
Move serious power into your aux battery bank with the REDARC BCDC Classic50. This in-vehicle 12V, 50A DC charger keeps you charged while you drive and from solar when you’re parked, making it ideal for big touring setups and high-demand fridges, inverters and lighting. It’s built for under-bonnet life with sealed, potted electronics that shrug off heat, dust and water.
The Classic50 pairs an MPPT solar regulator with Green Power Priority, so it uses available solar first and eases the load on your alternator. It works on 12V and 24V vehicles, including smart/variable-voltage alternators, and it’s tuned for modern chemistries including LiFePO4, as well as AGM, Gel, Calcium and standard lead-acid. A refined SoftStart stage and REDARC’s proven charge profiles deliver a proper, gentle ramp and a full state of charge.
As a guide, choose the BCDC1250D for lead-acid banks over 200Ah or lithium banks over 100Ah. For smaller systems (75–200Ah), the BCDC1225D is the better match.
Key features
-
50A in-vehicle charging from alternator and solar
-
Dual inputs with integrated MPPT and Green Power Priority
-
Works with 12V/24V systems and smart alternators
-
Compatible with AGM, Gel, Calcium, standard lead-acid and LiFePO4
-
SoftStart plus REDARC’s proven multi-stage profiles for battery health
-
Sealed, potted construction for reliable under-bonnet installation
-
Designed, built and tested in Australia
Sizing tip
-
Lead-acid banks: typically >200Ah
-
Lithium (LiFePO4): typically >100Ah
Always check your battery maker’s maximum charge current and match the charger’s continuous rating accordingly.
If you’re building a serious 12V system and want dependable charge on the move and at camp, the Classic50 is the workhorse you fit once and rely on everywhere.
| Warranty | 2 Years |
|---|---|
| gtin_barcode | 9338628004690 |
| brand | REDARC |
| Battery Chemistry | Standard Lead Acid, Calcium content, Gel, AGM or LiFePO4 type only |
| Continuous Rating | 50A |
| Power Type - AC DC | DC TO DC |
| Nominal Output Power | 750W |
| Input Fuse Rating | 60A (Not supplied) REDARC FK60 recommended |
| Solar Switch On Voltage | 9V |
| Suitable For 12V Systems | Yes |
| Suitable For 24V Systems | Yes |
| Solar Input Voltage | 9 - 32V |
| MPPT Solar Regulator | Yes |
| Cabin/ Canopy Install | Yes |
| No Load Current | <100mA |
| Trailer Install | Yes |
| Engine Bay Install | Yes |
| Max. Charging Voltage | 15.3V |
| Output Fuse Rating | 60A (Not supplied) REDARC FK60 recommended |
| Operating Temperature | -20°C to 80°C |
| Output Voltage | 12V DC |
| Max. Rated Output Current | 50A |
| Input Voltage | 9 - 32V |
| Standby Current | <8mA |
| Connector Type | Bare wire |
| Weight | 1 kg |
| width | 120 mm |
| height | 37 mm |
| depth | length | 165 mm |
