50A Anderson Plug Cover Kits | Single & Dual

The OTA 50A Anderson plug surface mount's are a PETG 3D printed product designed to affordably and effectively provide cover for your surface mounted Anderson plugs where they might be exposed to the elements.  100% Australian Made & Designed. 

KITS INCLUDE

1. Single 50A Anderson Plug Cover Kit inc. Anderson Plug
   
   • Single 50A Anderson Plug Cover
   • 4x mounting screws
   • 1x 50A Anderson plug
   • 1 length of O-ring rubber to seal the underside
2. Single 50A Anderson Plug Cover Kit exc. Anderson Plug
   • Single 50A Anderson Plug Cover 
   • 4x mounting screws
     
   • 1 length of O-ring rubber to seal the underside
3. Dual 50A Anderson Plug Cover Kit inc. Anderson Plug
   
   • Dual 50A Anderson Plug Cover
   • 4x mounting screws
   • 2x 50A Anderson plug
   • 1 length of O-ring rubber to seal the underside
4. Dual 50A Anderson Plug Cover Kit exc. Anderson Plug
   • Dual 50A Anderson Plug Cover 
   • 4x mounting screws
     
   • 1 length of O-ring rubber to seal the underside
     

SPECIFICATIONS

• Single plug cover: 100 x 71 x 20mm
• Dual plug cover: 110 x 100 x 20mm

INSTALLATION

Installation is simple and quick – Follow the steps below:

1. Fit the O-ring rubber to the underside of the cover.
2. Locate area for mounting the cover.
3. Trace around the holes and outer edge of the cover using something removable, ie. Pencil.
4. Using a 3mm drill bit – Drill a pilot hole for one of the holes.
5. With the Anderson plug wired and fitted into the cover, align the pre-drilled hole to the correct hole in the cover and screw it into plate *Note that adding some silicone to each hole/screw before fixing in place will help prevent water ingress.
6. Fix remaining screws to secure your cover in place for use.

Please Note: 

• Images are for illustration purposes only.  Finish may vary on actual product. 
• No wiring included.